Volumetric changes in temporomandibular joint space following trans-oral vertical ramus osteotomy in patients with mandibular prognathism: a one-year follow-up study.

This study measured and analyzed chronological changes in temporomandibular joint space volume by compartment following transoral vertical ramus osteotomy (TOVRO) using reconstructed 3-dimensional (3D) images of patients with mandibular prognathism. It included 70 joints of 35 patients who underwent TOVRO between January 2018 and December 2021. Computed tomography (CT) or cone-beam CT (CBCT) was performed before surgery (T0) and at 3 days (T1), 6 months (T2), and 12 months postoperatively (T3). These scans were then analyzed using 3D software. The volumes of the overall (Vjs), anterior (Vajs), posterior (Vpjs), medial (Vmjs), and lateral (Vljs) joint spaces were calculated at each time point. A linear mixed model and repeated-measures covariance pattern with unstructured covariance were used to evaluate significant changes in joint space volume over time. Vjs significantly increased to 134.54 ± 34.28 mm3 at T3 compared to T0 (p < 0.001). Vpjas and Vljs increased by 130.72 ± 10.07 mm3 and 109.98 ± 7.52 mm3 at T3 compared to T0, respectively (p < 0.001). However, no significant difference was observed between T0 and T2 in Vajs and Vmjs (p = 0.9999). The observed volume increases in Vpjs and Vljs appeared to contribute to the overall Vjs increase.

Machine Learning Effectively Diagnoses Mandibular Deformity Using Three-Dimensional Landmarks.

BACKGROUND: Jaw deformity diagnosis requires objective tests. Current methods, like cephalometry, have limitations. However, recent studies have shown that machine learning can diagnose jaw deformities in two dimensions. Therefore, we hypothesized that a multilayer perceptron (MLP) could accurately diagnose jaw deformities in three dimensions (3D). PURPOSE: Examine the hypothesis by focusing on anomalous mandibular position. We aimed to: (1) create a machine learning model to diagnose mandibular retrognathism and prognathism; and (2) compare its performance with traditional cephalometric methods. STUDY DESIGN, SETTING, SAMPLE: An in-silico experiment on deidentified retrospective data. The study was conducted at the Houston Methodist Research Institute and Rensselaer Polytechnic Institute. Included were patient records with jaw deformities and preoperative 3D facial models. Patients with significant jaw asymmetry were excluded. PREDICTOR VARIABLES: The tests used to diagnose mandibular anteroposterior position are: (1) SNB angle; (2) facial angle; (3) mandibular unit length (MdUL); and (4) MLP model. MAIN OUTCOME VARIABLE: The resultant diagnoses: normal, prognathic, or retrognathic. COVARIATES: None. ANALYSES: A senior surgeon labeled the patients' mandibles as prognathic, normal, or retrognathic, creating a gold standard. Scientists at Rensselaer Polytechnic Institute developed an MLP model to diagnose mandibular prognathism and retrognathism using the 3D coordinates of 50 landmarks. The performance of the MLP model was compared with three traditional cephalometric measurements: (1) SNB, (2) facial angle, and (3) MdUL. The primary metric used to assess the performance was diagnostic accuracy. McNemar's exact test tested the difference between traditional cephalometric measurement and MLP. Cohen's Kappa measured inter-rater agreement between each method and the gold standard. RESULTS: The sample included 101 patients. The diagnostic accuracy of SNB, facial angle, MdUL, and MLP were 74.3, 74.3, 75.3, and 85.2%, respectively. McNemar's test shows that our MLP performs significantly better than the SNB (P = .027), facial angle (P = .019), and MdUL (P = .031). The agreement between the traditional cephalometric measurements and the surgeon's diagnosis was fair. In contrast, the agreement between the MLP and the surgeon was moderate. CONCLUSION AND RELEVANCE: The performance of the MLP is significantly better than that of the traditional cephalometric measurements.

Application of Surgery-First Approach in Treating Skeletal Dentofacial Asymmetry with Orthognathic Surgery.

BACKGROUND: Skeletal dentofacial asymmetry decreases patient's attractiveness by deteriorating symmetry of facial appearance which is of great significance to individuals. Surgery-first orthognathic approach manifests its advantages of shortening treatment time and improving patient's quality of life. However, current literature on surgery-first approach mainly focuses on treating prognathism, overlooking its efficacy in improving facial symmetry of skeletal dentofacial asymmetry patients. This study aimed to assess SFA's efficacy in improving facial appearance by analyzing morphological features of asymmetric bone and facial soft tissue in a three-dimensional manner. METHODS: Thirty-four patients who received orthognathic surgery in a surgery-first fashion were included. Based on three-dimensional CT reconstruction, bilateral preoperative morphological features and postoperative symmetry of hard tissue were compared respectively. Efficacy of facial soft tissue symmetry restoration was evaluated using root mean square deviation (RMSD). RESULTS: Asymmetric features mainly located in menton, mandibular body length, angulation between ramus and midsagittal plane (MSP), distance between gonion and MSP and so on, which were significantly restored after the whole treatment. RMSD of facial soft tissue surface were significantly declined after the treatment and prognathism was corrected simultaneously if existed. CONCLUSIONS: Surgery-first orthognathic approach is proved to be capable of treating skeletal dentofacial asymmetry effectively and efficiently.

Long-term evaluation of the upper airway following mandibular setback surgery in the patients with mandibular prognathism.

OBJECTIVE: The aim of this study was to evaluate the changes in the upper airway following mandibular setback surgery. METHODS: The patients underwent mandibular setback surgery and cone-beam computed tomography scan data obtained at four time points: before surgery, immediately after surgery, short- and long-term follow-up. Upper airway geometries were segmented and extracted at each time point. Time-averaged airflow through the upper airway was evaluated at each time point. The measurements of airway volume and minimum cross-sectional areas were obtained at four time points. RESULTS: The airway volume and cross-sectional areas of airway significantly decreased immediately after surgery (p = 0.013 for airway volume and 0.016 for cross-sectional area). At short-term follow-up, the decreased airway volume and cross-sectional areas still showed statistically significant difference to original dimension (p = 0.017 for airway volume and 0.006 for cross-sectional area). At long-term follow-up, although there were no statistical significances (p = 0.859 for airway volume and 0.721 for cross-sectional area), the airway volume and cross-sectional areas had increased slightly compared to those at short-term follow-up. CONCLUSIONS: Although the airflow and dimensional parameters of the upper airway worsened following mandibular setback surgery, there was a tendency to gradually recover during long-term follow-up.

Three-Dimensional Quantitative Assessment of Condylar Displacement and Adaptive Remodeling in Asymmetrical Mandibular Prognathism Patients After Sagittal Split Ramus Osteotomy.

This study was performed to evaluate the condylar displacement and associated condylar remodeling in class III patients following mandibular setback surgery via sagittal split ramus osteotomy (SSRO). The sample comprised of 26 condyles of 13 subjects (mean age of 21.2±2.6 y). We evaluated patients with mandibular prognathism and facial asymmetry who had undergone SSRO for mandibular setback at Korea University Hospital between January 2016 and December 2018. Three-dimensional segmentation of the mandibular condyles was done using the initial cone-beam computed tomography scan and scan taken 12 months postoperatively or later. Quantitative assessments of the 3-dimensional condylar displacement from T0 to T1 and bony remodeling of 8 regions of the condylar head were performed. The correlation between the condylar displacement and condylar head remodeling on the deviated (D) and nondeviated (ND) sides was analyzed. Significant correlations between condylar displacement and surface remodeling were observed in both D and ND condyles. The anteroposterior condylar displacement was significantly different between the D and ND sides (P=0.007). There was no significant difference in condylar remodeling between the 2 sides. Condylar displacement and adaptive remodeling after SSRO varied greatly among individuals. Compared with displacement in the ND condyle, displacement in the D condyle has a greater association with condylar remodeling in both D and ND condyles. There is no significant difference in condylar head remodeling between D and ND condyles.

A detailed radiomorphometric analysis of the mandibular foramen, lingula and anti-lingula with a special emphasis on mandibular prognathism.

INTRODUCTION: The aim of this study was to evaluate radiomorphometric differences of mandibular foramen (MF), lingula (Li), and anti-lingula (AL) between prognathic and non-prognathic patients, using cone-beam computed tomography (CBCT). METHODS: A total of 228 3D CBCT images of 57 prognathic and 57 non-prognathic patients were retrospectively evaluated. The distances between MF or Li to occlusal plane (OP), anterior border of ramus (AR), posterior border of ramus (PR), sigmoid notch (SN), gonion (Go) and distances Li to MF were measured. The presence of AL, and the distances to Li were also assessed in both groups. RESULTS: In prognathic patients the mean distances of MF-AR and Li-PR were lesser, and Li-OP was greater (p < 0.05). However, distances from MF or Li to the other ramal landmarks were similar in both groups (p > 0.05). Presence of AL was found at 53 sides in prognathic and 20 sides in non-prognathic groups (p < 0.05). The horizontal distance of Li-MF was greater in prognathic patients (p < 0.05). On the other hand, there was no difference between groups regarding the horizontal distance of Li-Al, and the vertical distances of Li-MF and Li-AL (p > 0.05). CONCLUSION: The present study provided valuable data regarding morphological differences of MF-AR, Li-MF and Li-OP, which should be considered in the preoperative assessment of patients with mandibular prognathism. Presence of AL was more common in prognathic patients and mainly located above Li. 3D CBCT applications facilitated assessment of AL and its relationship with Li.

Evaluation of bony changes observed in mandibular osteotomy lines and mandibular condyles following bilateral sagittal ramus osteotomy by fractal analysis.

OBJECTIVES: This study aimed to evaluate the surgically impacted trabecular changes in mandibular osteotomy lines and mandibular condyles after bilateral sagittal split ramus osteotomy using the fractal analysis method. MATERIALS AND METHOD: The study population consisted of 30 patients (9 male, 21 female) diagnosed with mandibular prognathism and operated with bilateral sagittal split ramus osteotomy under general anesthesia. Fractal analyses observed the alterations on the trabecular structure of osteotomy lines, and mandibular condyles on panoramic radiographs obtained preoperatively, postoperatively, 1st week, 6th month, and 12th month. The box-counting method was used to evaluate the changes in trabecular structure by fractal analysis. P-values of less than 0.05 were considered significant. RESULTS: The fractal dimension values in both osteotomy lines and mandibular condyles were significantly decreased on postoperative 1st week regarding preoperative values. However, fractal dimension values commenced increasing in the following postoperative period. The fractal dimension values of the horizontal and vertical osteotomy lines reached their preoperative values on postoperative 6th and 12th month, respectively. The decreased fractal dimension values observed in the early postoperative period in the right and left condyles reached their preoperative values at the 6th postoperative month. CONCLUSION: Fractal analyses performed postoperatively can provide information about trabecular changes and bone healing of structures such as osteotomy lines directly affected by bilateral sagittal split ramus osteotomy and indirectly affected mandibular condyles. The results support that fractal analysis can be used together with clinical data in the evaluation of bone healing process.

Personalized 3D-printed Titanium Cutting Guide and Prefabricated Osteosynthesis Plate for Mandibular Step Osteotomy to Treat Severe Mandibular Prognathism.

Mandibular step osteotomy, performed for mandibular prognathism, is a difficult and time-consuming procedure. Virtual computer surgery and computer-aided design & computer-aided manufacturing have demonstrated accurate results in orthognathic surgery, though not used for mandibular step osteotomy yet. In this study, the authors report the case of a 21-year-old man with severe mandibular prognathism, with a reverse overjet of 12 mm. Step osteotomy, a modified method of body osteotomy, was planned virtually and performed using 3-dimensional (3D) printed titanium surgical guides and osteosynthesis plates, using computer-aided design & computer-aided manufacturing. At the 6-month postoperative follow-up, there were no notable complications, and normal healing was observed. Each segment was stably in place with the prefabricated plates. The proximal segments were not sagged medially or laterally. With 3D-printed surgical guides and osteosynthesis plates, intraoperative complications, such as injury to adjacent teeth and nerves, could be avoided. They also showed reasonable accuracy and helped reduce operative time and improve outcomes. Unlike surgical guides made of resin/polyamide, titanium surgical guides can be made thinner, which can reduce the extent of detachment. They also did not undergo any deterioration during the operation. Cutting guides and prefabricated plates using virtual surgical planning and 3D printing have many advantages, including reduced preoperative preparation time and operative time, reduced incidence of intraoperative complications, and improved outcomes. However, limitations still exist and further studies are required.

Three-Dimensional Visualization of Postsurgical Airway Changes Using 3D Printing Technology in a Patient With Mandibular Prognathism: A 5-Year Follow-up Study.

This case-report described the 3-dimensional (3D) evaluation of airway changes using 3D printing technology in a patient with mandibular prognathism, treated via mandibular setback surgery with maxillary posterior impaction. The airway dimensions, following orthognathic surgery, were printed using 3D printing technology and the sequential airway changes were visualized. The patient underwent orthognathic surgery for the correction of mandibular prognathism. Five years later, the airway changes were visualized and evaluated using rapid prototyping. The 3D visualization of the airway changes following surgery alerted clinicians of patients with mandibular prognathism and facilitated effective communication with their patients. This case-report documented the long-term evaluation and visualization of the postoperative airway changes in patients with mandibular prognathism using cone-beam computed tomography and 3D printing technology.

Improved lip esthetics in patients with skeletal Class III malocclusion and facial asymmetry after isolated mandibular orthognathic surgery.

INTRODUCTION: Asymmetry of the lips severely affects facial esthetics and is often one of the chief complaints of orthognathic patients, especially those with Class III malocclusion. The objectives of this study were to investigate the changes in lip symmetry in patients with mandibular prognathism and deviation and the relationships between jaw hard tissue and lip soft-tissue changes. METHODS: Three-dimensional facial scan and cone-beam computed tomography scan data of 30 orthodontic-orthognathic patients treated with bilateral sagittal split ramus osteotomy were combined to conduct the research. Paired-sample t test and Pearson correlation coefficient were applied to compare the differences in the same variable before and after the orthognathic surgery and the potential correlations between the changes in hard and soft variables. To explore the important hard tissue variables influencing the lip soft-tissue changes, linear regression analysis was performed. RESULTS: Although there was significant upper lip asymmetry presurgery, the upper lip asymmetry was corrected postsurgery. Surgical correction of the mandibular deviation was also accompanied by lengthening of the bilateral philtrum crests. Improvement in lip asymmetry and lengthening of the philtrum crests were primarily related to the transverse correction of the mandible rather than sagittal changes. The corresponding prediction formulas were established. CONCLUSIONS: The isolated mandibular bilateral sagittal split ramus osteotomy surgery can substantially improve the upper and lower lip asymmetry in patients with mandibular prognathism and deviation, but one should be wary of the unesthetic effects associated with lengthening of the philtrum crests.

Three-dimensional condylar displacement and remodelling in patients with asymmetrical mandibular prognathism following bilateral sagittal split osteotomy.

This study aims to assess the postoperative condylar displacement and the long-term condylar remodelling in patients with mandibular prognathism with transverse asymmetry after bilateral sagittal split ramus osteotomy (BSSRO). Forty-one consecutive patients (82 condyles) with a transverse mandibular asymmetry of more than 4 mm without occlusal canting treated by BSSRO were included. The preoperative (T1), immediate postoperative (T2) and long-term follow-up of an average of 16.2 months (T3) spiral computed tomography scans were gathered and processed to measure the condylar displacement and remodelling based on cranial base voxel-based and rigid regional registrations. The statistical analysis revealed that the majority of condyles (T1-T2) were transitionally displaced forwards, downwards and laterally, and were not fully returned to the preoperative position at T3. Condylar lateral displacement was significantly higher on the deviated side (DS) (P = 0.035). Non-deviated side (NDS) condyles were mainly subjected to upward pitch, medial yaw and medial roll compared with downward pitch, lateral yaw and lateral roll on DS. Condylar remodelling at T3 was observed, with the superior and posterior surfaces commonly subjected to bone resorption, whereas the anterior and medial surfaces were commonly subjected to bone apposition. Condylar volumetric changes were relatively comparable on NDS (3 ± 85.2 mm3) and DS (8.3 ± 111.7 mm3) condyles. Age, amount of preoperative asymmetry and follow-up period were not correlated with the condylar remodelling. Transitional and rotational displacements were to some extent significantly correlated with the condylar remodelling on both sides. Consequently, passive condylar seating without torque might prevent the long-term unfavourable condylar remodelling.

Two-thirds anteroposterior ramus length is the preferred osteotomy point for intraoral vertical ramus osteotomy.

OBJECTIVES: This study aimed to investigate the mandibular canal of ramus and design a suitable osteotomy line for intraoral vertical ramus osteotomy (IVRO) using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Ninety patients were classified into class I, II, and III skeletal pattern groups. When extended from the horizontal base plane (0 mm, mandibular foramen [MF]), with a 2-mm section interval, to 10 mm above and 10 mm below the MF, the following landmarks were identified: external oblique ridge (EOR), posterior border of the ramus (PBR), and posterior lateral cortex of ramus (PLC): IVRO osteotomy point. RESULTS: In the base plane (0-mm plane), the EOR-PBR distance of class III (34.78 mm) and the IOR-PBR distance of class II (32.72 mm) were significantly higher than those of class I (32.95 mm and 30.03 mm). Compared to the EOR-PLC distance, the designed osteotomy point (two-thirds EOR-PBR length) has a 3.49-mm safe zone at the base plane and ranging from 0.89 mm (+ 10-mm plane) to 8.37 mm (- 10-mm plane). CONCLUSIONS: The position at two-thirds EOR-PBR length (anteroposterior diameter of the ramus) can serve as a reference distance for the IVRO osteotomy position. CLINICAL RELEVANCE: Mandibular setback operations for treating mandibular prognathism mainly include sagittal split ramus osteotomy (SSRO) and IVRO. IVRO has a markedly lower incidence of postoperative lower lip paraesthesia than SSRO. Our design presented a reference point for identification during IVRO, to prevent damage to the inferior alveolar neurovascular bundle.

Penetration of inferior alveolar nerve canal increased by bicortical fixation after bilateral sagittal split osteotomy in mandibular prognathism.

The purpose of this three-dimensional cone beam computed tomography (CBCT) study was to identify the difference between monocortical fixation (MCF) and bicortical fixation (BCF) in mandibular canal penetration after bilateral sagittal split osteotomy (BSSO) to correct mandibular prognathism, where interosseous fixation was done by BCF or MCF. CBCT was performed 1 week postoperatively and Dolphin 3D software was used to assess direct penetration of the mandibular canal by either type of screw. The primary outcome variable was the presence or absence of mandibular canal penetration and was categorized as a binary coded variable. The BCF and MCF groups were compared by χ2 test, and the odds ratio for canal penetration was estimated. Multiple logistic regression was performed to identify factors related to canal penetration. A total of 118 patients were included. The MCF group had only 6% canal penetrations (3/50 patients) and the BCF group had 58.8% canal penetrations (40/68 patients). The regression model showed that BCF was the only factor causing mandibular canal penetration, with an adjusted odds ratio of 52.5. Awareness of the increased risk of canal penetration with BCF and potential nerve injury might influence case selection.

Three-dimensional condylar displacement and remodelling following correction of asymmetric mandibular prognathism with maxillary canting.

The aim of this study was to investigate the three-dimensional condylar displacement and long-term remodelling following the correction of asymmetric mandibular prognathism with maxillary canting. Thirty consecutive patients (60 condyles) with asymmetric mandibular prognathism >4 mm and occlusal canting >3 mm, treated by Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included. Spiral computed tomography scans obtained at different periods during long-term follow-up (mean 17 ± 7.2 months) were gathered and processed using ITK-SNAP and 3D Slicer. The condyles were subjected to translational and rotational displacements immediately after the surgery (T2), which had not fully returned to the original preoperative positions at the last follow-up (T3). Condylar remodelling was observed at the last follow-up (T3), with the shorter side condyles subjected to higher surface resorption and overall condylar volume loss. The overall condylar volume on the shorter side was significantly reduced compared to the volume on the elongated side (-11.9 ± 90.6 vs -131.7 ± 138.2 mm3; P = 0.001). About 73%, 87%, 53%, and 54% of the shorter side condyles experienced resorption on the posterior, superior, medial, and lateral surfaces, respectively; in contrast, only 50% of the elongated side condyles showed resorption on the superior surface. Higher preoperative asymmetry was significantly correlated with increased postoperative condylar displacement (P < 0.05). The vertical asymmetry and the vector of condylar displacement were associated with the resultant remodelling process. It is concluded that condylar resorption of the shorter side condyle, which may affect the long-term surgical stability, has to be considered.

Influence of lingual plate fracture pattern on remodelling site during the healing process of sagittal split ramus osteotomy.

The purpose of this study was to investigate whether differences in the pattern of the lingual plate split in sagittal split ramus osteotomy (SSRO) affect the remodelling of the split site. Sixty-one patients with mandibular prognathism (122 sides) underwent SSRO. Computed tomography (CT) was performed at 1 week and 1 year after SSRO. Bone splits were classified according to the lingual split scale (LSS) and the lateral bone cut end (LBCE) by evaluating CT images at 1 week. The remodelling at the split sites was evaluated by superimposing the CT images obtained at 1 week and 1 year. Regarding the LSS pattern, significant differences were observed in the distance between anteroposterior ramus points (P = 0.033) and the ramus area in the axial image (P = 0.011). The LBCE pattern also showed a significant difference in the distance between anteroposterior ramus points (P = 0.043). In conclusion, the differences in the lingual plate split and ramus cut end of the SSRO influence the postoperative remodelling in the anteroposterior region of the split site.

Sequential Changes in Pharyngeal Airway Dimensions After Mandibular Setback Surgery and Its Correlation With Postsurgical Stability in Patients With Mandibular Prognathism.

PURPOSE: This study aimed to evaluate the sequential changes in the pharyngeal airway dimensions after mandibular setback surgery and to verify its correlation with postsurgical mandibular stability in patients with mandibular prognathism. PATIENTS AND METHODS: This retrospective study included 28 patients with mandibular prognathism who underwent surgical orthodontic treatment and isolated mandibular setback surgery. Patients who had cone-beam computed tomography before surgery, immediately after surgery, at short-term follow-up (11.8 ± 5.1 months), and long-term follow-up (43.0 ± 13.1 months) were included. Airway dimensions, including distance, minimum cross-sectional area, and airway volume, were measured to evaluate the changes following mandibular setback surgery. With the measurements of postsurgical mandibular relapse, the relationship between sequential changes in airway dimensions and the mandible was verified using correlation analysis. RESULTS: Airway dimensions decreased immediately after mandibular setback surgery. The decreased airway dimensions recovered during short-term follow-up and maintained to the long-term follow-up. The mandible was set back 7.7 ± 5.1 mm at pogonion immediately after surgery. Postsurgical skeletal relapse was 1.1 mm at pogonion during short-term follow-up. During long-term follow-up, the mandible moved 0.4 mm anteriorly, which was about 50% of the changes during short-term follow-up. Statistically significant correlations were found between the sequential changes in airway dimensions and the postsurgical skeletal relapse. CONCLUSION: The decreased airway dimensions following mandibular setback surgery recovered during short-term follow-up and maintained to the long-term follow-up. Dimensional recovery of the pharyngeal airway was correlated with postsurgical skeletal relapse during the 1-year follow-up period.

A surgery-first approach using single-jaw rotational mandibular setback in low-angle mandibular prognathism.

For the treatment of low-angle mandibular prognathism, rotational mandibular setback surgery is usually performed with Le Fort I maxillary osteotomy to rotate the maxillomandibular complex simultaneously. However, this maxillary surgery can be replaced with the orthodontic intrusion of maxillary posterior teeth. Single-jaw rotational mandibular setback surgery can be done with a surgery-first approach by planning orthodontic rotation of the maxillary occlusal plane with the simulation of the postsurgical forward mandibular rotation. This case report describes this approach applied to a 19-year-old female patient with low-angle mandibular prognathism but without maxillary deficiency. A Class II open bite was formed by the rotational setback surgery. During postsurgical orthodontic treatment, the maxillary total arch was distalized with maxillary molar intrusion using palatal mini-implants and lever. This case report demonstrates that orthodontic rotation of the maxillary occlusal plane and simulation of mandibular rotation can replace maxillary surgery and enable single-jaw rotational mandibular setback surgery with a surgery-first approach.

Morphometric Analysis of Cleft Lip Palate and Prognathic Mandibles in Relation to Mandibular Canal Course.

INTRODUCTION: This study aimed to evaluate the mandibular canal course in individuals with cleft lip palate (CLP) and mandibular prognathism in terms of the sagittal split-ramus osteotomy using cone-beam computed tomography. MATERIALS AND METHODS: Individuals with CLP older than 16 years of age and planned to undergo Le fort I + SSR osteotomies and those with class III occlusion planned to undergo Le fort I + SSR osteotomies were included. The measurements on the cleft side of CLP patients were compared with both their noncleft sides and those with class III occlusion. The course of the inferior alveolar nerve and its position in the mandible were evaluated starting from the mandibular foramen, the first entrance to the mandible, to the mental foramen, the exit from the mandible. RESULTS: The distance between the mandibular canal and the buccal surface of the mandible (B3) on the plane tangent to the distal of the mandibular first molar and perpendicular to the occlusal plane was found to be greater in individuals with CLP (P = 0.011). Buccal cortex thickness (C4) at the level of the mandibular canal on the plane tangent to the distal of the mandibular second molar and perpendicular to the occlusal plane was found to be lower in individuals with CLP (P = 0.021). CONCLUSIONS: The buccal cortex thickness of the mandible corpus and the distance of the mandibular canal to the buccal surface is different in patients with CLP compared to class III individuals' posterior to the mandible. Surgeons should take these differences into consideration during mandibular osteotomy.

The goniomaxillar length/goniomandibular length ratio in normal newborn infants: A clinical tool for defining chin position abnormalities.

Retrognathia (recessed chin) and prognathism (prominent chin) often present as signs of an underlying condition. Accurate clinical definitions are important. Yet their definitions were according to "clinical impression", or to seldom used X-ray criteria. We propose a statistical and anthropometric definition of retrognathia and prognathism based upon the ratio between the goniomaxillar length (distance between the gonion at the mandible angle and the subnasale and the goniomandibular length (distance between the mandible angle and the most anterior point of the bony chin). We assumed that an increase in the ratio indicates retrognathia and a decrease reflects prognathism. We conducted a prospective, observational, anthropometric study in 204 consecutive healthy term infants. Measurements took place on the second day of life, using sliding calipers. Mean ± SD of goniomandibular length (5.1 ± 0.3 cm), goniomaxillar length (5.4 ± 0.3 cm), were calculated. All measurements correlated significantly with gestational age, and with infant birthweight. The mean ± SD goniomaxillar length/goniomandibular length ratio was 1.06 ± 0.05. We defined a normal ratio as being within 2 SD of the mean, that is, between 0.96 and and 1.16. This ratio correlated with neither gestational age nor with birthweight. We conclude that the goniomaxillar length/goniomandibular length ratio can be calculated whenever retro - or prognathism is suspected. A ratio outside of the 95% confidence interval should help in making this diagnosis. An increase in this ratio beyond 2 SD above the mean (1.16) could be interpreted as retrognathia and a decrease beyond 2 SD below the mean (0.96) as prognathism.

Biomechanical study on the changes of stress in temporomandibular joints after the orthognathic surgery in patients with mandibular prognathism: a 3D finite element study.

PURPOSE: This study aimed to analyze the changes of the stress distributions in TMJs for the pre- and postoperative patients with mandibular prognathism under unilateral occlusions, a frequent occlusion in mastication. METHODS: Pre- and six-mouth postoperative cone-beam computed tomography images of thirteen patients diagnosed with mandibular prognathism were scanned and used to construct complete maxillofacial models, assigned as the Pre and Post group, respectively. Another ten asymptomatic individuals were defined as the Control group. The inhomogeneous properties were assigned to the models. The muscle forces and boundary conditions corresponding to left and right unilateral occlusions were applied on the models. The analysis of variation (ANOVA) was chosen for the comparison among the groups. RESULTS: The results showed that the Pre group had abnormal stress distributions ang higher stress level in TMJs, compared with those of the Post and Control groups. Moreover, from clinical cases, symptoms of temporomandibular disorders (TMDs) always followed with increased stresses. CONCLUSION: Generally, orthognathic surgeries could improve the stress distribution in TMJs of the patients with mandibular prognathism under the unilateral occlusions. However, the postoperative complications, especially symptoms of TMD, were closely related to changes of stress for patients with mandibular prognathism after orthognathic surgeries. Individual virtual surgery and finite element analysis should be conducted to prevent complications in TMJ.